Wednesday, April 29, 2015

BAO 28 Apr 2015
~1730-1800 UTC the T/RH was replaced at 300m. S boom was in (bad directions) and N boom may be off by 5- 15 degrees too.
NCAR reported all looks good now.
~,4" of precip with last system.

Tuesday, April 28, 2015

Data and quicklooks from the Halo Photonics Streamline lidar are available at


https://engineering.arm.gov/~newsom/Doppler/offsite/xpia/Halo/


This includes the "raw" radial velocity data, as well as processed VAD winds, and vertical velocity statistics (variance, skewness, kurtosis, cloud base height, cloud fraction, cloud base vertical velocity, and velocity precision estimates).


The Halo maintained a consistent scan schedule throughout its deployment period (from March 6th to April 16th). The scan schedule was as follows:
  • 8 beam PPI scan at 60 deg elevation once every 12 minutes.
  • narrow sector scan toward light posts near the EHS stadium once per day.
  • ~10 minute slant-path stare near 50-m level on the BAO tower once per hour.
  • Vertical stares the rest of the time.
The Halo was operated using a 30-m gate size, and with a 1-second pulse integrate time. The maximum number of gates was set to 200. With the exception of a fairly minor software glitch on the April 9, the Halo functioned quite well. The glitch resulted in downtime during the latter half of April 9th, all of the 10th, and the first half of April 11th.

Sunday, April 26, 2015

Motion Table April 24, 2015
Looks very cool, especially when moving.
What you see is the motion table mounted on the trailer with the Vindicator "Egg" sitting on the platform. The trailer sits inside a wind screen/break.



The air compressor that provides power to the motion arms is covered by the blue tarp off to the left.

Friday, April 24, 2015

BAO 300m T/RH
Now the fan on this sensor has gone bad.  We measure the fan current and our software removes data when the fan is not operating.  We could use the data, but they would be contaminated by a radiative heating error.

Replacement being prepared by NCAR and will be replaced some time next week.

All other sensors working.

Thursday, April 23, 2015

3D Volume Scans

Over the last three days, the four 200S lidars and HRDL were engaged in testing various configurations of volume scans to measure and visualize flow behind a wind turbine.  With this goal, the following two configurations were tested.

1. Small box pattern:
This pattern has a high update rate of once every 15 sec.  It envelops a small volume of 100mX100m and from 30m above ground to 130m above ground.  This pattern is focused on producing retrievals just behind or ahead of a wind turbine.

2. Medium box pattern:
This pattern covers a slightly larger volume of approx 400mX400m and from surface to 200m above the ground with ~15m vertical resolution at each of the scan intersections.  Due to the larger area coverage the update rate is reduced to once every 1 min.



Friday, April 17, 2015

Weather warning - hard hats recommended near the guy wires due to chance for falling ice

Posting for Dan Wolfe:

The situation at the BAO is extremely wet, slushy, and messy. Over 1.5" of precip have fallen, which is a lot of this site, so even the roads are likely to be complicated. There could be slush or possible ice on the tower and guys, so activity near the guys should include using hard hats (available in the Visitor Center and in the trailer at the tower base) in case of ice falling from the guy wires.